• NCB 's Services at a glance

    Cement Industry
    Alternative Fuels
    Coating & Build-up
    Comprehensive Process Audit
    Energy Audit
    Geology, Mining and Raw Materials
    Investigations on kiln shell corrosion
    Limestone Consumption Factor
    Optimization of Raw Mix Design
    Plant Maintenance
    Process and Productivity
    Project Engineering & System Design
    Raw Materials, Cements & Special Formulations
    Refractory Engineering Services
    Studies on coating and ring formations
    Concrete and Construction Technology
    Evaluation of Aggregates
    Concrete Mix Design and Admixture Testing
    Mechanical Properties of Concrete
    Durability Tests of Concrete
    Third Party Construction Quality Audit
    Structural Optimization and Design
    Energy & Environment
    Environment Management
    Energy Audit
    Laboratory Services
    Calibration Laboratory Services at NCB
    NCB Proficiency Testing Scheme
    Standard Reference Materials (SRMs)
    Quality Management Services
    Third Party Construction Quality Audit
    TQM & Quality Systems
    Structural assessment and Rehabilitation
    Non-Destructive Testing & Diagnostics for Distressed Structures
    Durability Tests of Concrete
    Testing and Evaluation of Materials
    Evaluation of raw materials and cement samples
    Testing Services
    Evaluation of Aggregates
    Durability Tests of Concrete
    Mechanical Properties of Concrete
    Training
    PG Diploma in Cement Technology
    Short Term Courses
    Special Group Training Programmes
    Simulator based courses
    Waste Utilization
    Alternative Fuels
    Wastes Utilization
    Advanced Facilities
    Heating Microscope
    Inductive Coupled Plasma Spectrometer
    Optical Microscopy
    Scanning Electron Microscope (SEM)
    X-Ray Diffractometer (XRD)

    Project & Industrial Activities

    See More...
  • Sh G J Naidu

    • M.Sc. (Chemistry), PGDEM
    • 24 Years’ experience in the area of cement raw mix design for different type of cements, testing and evaluation activities of cements, cement raw materials, fuels etc., utilization of industrial wastes such as fly ash, bottom ash, lime sludge, GBF slag in development of OPC based blended cements

    Sh Anil Popuri

    • B. Tech (Chemical) from Osmania university, Certified Energy Auditor
    • Over 15 years of experience in the field of Plant Operation, Consultancy & Process Design and Retrofit Engineering of Cement plants.

    Sh S K Agarwal

    • M.Sc. (Physics), M.Phil
    • 32 years’ experience in cement technology, use of alternate raw materials and SCMs, development of building products
    • About 45 research papers published in journals like Cement and Concrete Research, Advances in Cement Research, ICR etc and communicated in national & international conferences
    • 8 patents to credit
    • Reviewer of international journal “Advances in Cement Research”
    • Activity incharge-Patents

    Dr Pinky Pandey

    • M.Sc. (Chemistry), Ph.D
    • 12 years’ experience in the area cement chemistry, testing of cement, allied materials and fuel
    • About 28 research papers published in journals/Seminars/Conferences

    Sh T Mohan Rao

    • M.Sc. (Chemistry)
    • 33 years’ experience in the field of cement research, instrumental techniques

    Sh Suresh Vanguri

    • M.Sc. (Physics), M.Tech (Solid State Technology)
    • 9 years’ experience in the area of material, characterization, raw mix design, cement hydration, waste utilization
    • 15 research papers published and presented in national and international conferences

    Dr Varsha Liju

    • M.Sc. (Chemistry), Ph.D and Post-Doctoral from Trinity college, Dublin, Ireland
    • 8 years’ of experience in the area of geopolymeric cement, cement nanotechnology, composite cement, raw mix designing
    • 1 patent to credit
    • 20 paper in international journals and seminars
    • Experience in handling advanced instrumental techniques like TG/DTA, heating microscope etc

    Dr Suresh Palla

    • M.Sc. (Chemistry), Ph.D
    • 5 years’ experience in the areas of material science and cement chemistry
    • Experience in operation of advanced instrumental techniques; XRD, XRF, SEM, Isothermal calorimeter
    • 35 published paper in International/National journals, seminar etc.

    Sh Giasuddin Ahemad

    • B.Tech (Ceramic Engg.), M.Tech
    • 5 years’ experience in refractory materials, materials characterization, raw mix design, raw mix design, coating and build ups
    • Experience in refractory testing facilities like PCE, RUL, thermal spalling etc.

    Smt Richa Mazumder

    • M.Sc. (Tech) Applied Geology from IIT (ISM) Dhanbad
    • Over 10 years of experience in the field of geological exploration, site investigation, Computer-Aided Deposit Evaluation of limestone deposits, upgradation of low/ marginal grade limestone etc.

    Sh M V R Rao

    • B.Tech (Chemical), M-Tech (Energy & Environment-IIT Delhi), Certified Energy Auditor
    • Over 10 years of rich experience in the field of Process engineering, Plant operation, Energy management and Environment management.

    Sh Rayees Ahmed

    • B.E (Chemical Engineering), M-Tech (Chemical Engineering)
    • Over 12 years of rich experience in the field of Cement Process, Energy audit studies, Training activities

    Sh Kapil Kukreja

    • B.E (Mechanical), M-Tech (Energy & Environment-IIT Delhi), PhD (Mechanical -Perusing from BITS-Pilani)
    • Over 15 years of rich experience in the field of System Design, Project Engineering & Management.

    Sh Saurabh Bhatnagar

    • B.Tech (Mechanical), M-Tech in Energy & Environment-IIT Delhi (Pursuing)
    • Over 11 years of rich experience in the field of System Design, Project Engineering & Management.

    Sh Ankur Mittal

    • B.E (Chemical), M-Tech (Pursuing) (Energy Systems-IIT Delhi), BEE Certified Energy Auditor
    • Over 14 years of rich experience in the field of Cement plant operation, technical services, energy audits, technical faculty.

    Sh Prateek Sharma

    • B.E (Chemical), M-Tech (Energy Systems-IIT Delhi), BEE Certified Energy Auditor
    • Over 10 years of enriched experience in the field of Process Optimization, Energy Audits and Waste heat recovery studies.

    Sh Vaddy Venkatesh

    • B.E., (Electrical & Electronics Engineering), M-Tech (Energy Engineering)
    • Over 9 years of rich experience in the field of Energy audits in more than 70 cement plants & power plants, Electrical and Mechanical Third party Quality assurance & Training activities in NCB-H

    Sh Anand Bohra

    • M.Tech in Environment Management from IIT Delhi and B.E. (Hons) from M.B.M. Engineering College, Jodhpur
    • Having 9 years of experience in the field of Life Cycle Assessment, Reduction in NOx and SO2 in cement plants and Environment Management

    Sh KRP Nath

    • B.Tech (Chemical), M-Tech (Pursuing) in Environment Engg from JNTU
    • Over 10 years of experience in the field of Life Cycle Assessment, Reduction in NOx and SO2 in cement plants and Environment Management

    Sh Suresh Kumar

    • B.Tech (Civil)
    • 33 Yrs. Exp. in Concrete Technology

    Sh Manish Kumar Mandre

    • M.Tech (Civil)
    • 12 Yrs. Exp. in Concrete Technology

    Sh J Narsinga Rao

    • B.Sc
    • 32 Yrs. Exp. in Concrete Technology, Quality Control and Quality Assurance in construction

    Sh Amit N Gandhi

    • B.Tech (Civil)
    • 28 Yrs. Exp. in Concrete, Construction, Quality Control & Quality Assurance, Assessment of Structures

    Sh B Srinivasa Rao

    • M.Tech (Structures)
    • 22 Yrs. Exp. in Structural Engineering, Construction Technology, Assessment of Concrete Structures

    Sh D Pavan Kumar

    • M.Tech (Transportation Engg.)
    • 17 Yrs. Exp. in Quality Control & Quality Assurance of Civil Works

    Sh Arup Ghatak

    • B.Tech. (Civil)
    • 8 Yrs. Exp. in Construction Technology, Quality Mgt., Structural Assessment & Rehabilitation

    Sh Amit Sagar

    • B.E (Civil)
    • 11 Yrs. Exp. in Construction Technology, Quality Management

    Sh Ajay Kumar

    • B.E (Civil)
    • 8 Yrs. Exp. in Construction Technology, Quality Management

    Sh Dipesh J Tailor

    • Diploma & B.E (Civil)
    • 15 Yrs. Exp. in Concrete & Soil Mechanics, Quality Control & Quality Assurance of Construction work

    Sh Sunil Kumar Soren

    • B. Tech (Hons.) Civil Engg
    • 9 Yrs. Exp. in Construction Technology, Quality Management

    Sh Sanjay Mundra

    • M.Tech (Civil)
    • 18 Yrs. Exp. in Structural Assessment & Rehabilitation & Concrete Technology

    Sh Adarsh Kumar N S

    • M.Tech (Soil Dynamics)
    • 10 Yrs. Exp. in Structural Assessment, Rehabilitation, Quality Control & Quality Assurance

    Sh Rizwan Anwar

    • B.Tech. (Civil)
    • 9 Yrs. Exp. in Structural Assessment & Rehabilitation

    Sh Y N Daniel

    • M.Tech (Civil)
    • 7 Yrs. Exp. in Concrete Technology, Structural Assessment & Rehabilitation

    Sh Brijesh Singh

    • M.Tech (Structural Dynamics)
    • 10 Yrs. Exp. in Structural Engineering, Construction Technology, Assessment of Concrete Structures

    Sh Puneet Kaura

    • B.Tech (Civil)
    • 7 Yrs. Exp. in Concrete Technology, Durability Studies on Concrete

    Sh Arun Sood

    • B.Sc.
    • 37 Yrs. Exp. in Concrete Technology

    Sh S K Shaw

    • B-Tech (Chemical Engg.)
    • Over 10 years of rich experience in the field of Process Optimization & Productivity, Energy Audit, Cement Plant Operation and Development of CRMs & PT

    Sh P Srikanth

    • B. Tech (Electronic and Instrumentation Engineering), MBA (TQM)
    • Over 10 years of experience in the field of Calibration and Total Quality Management, Energy Audit and Electronic Signaling Systems

    Sh V Naga Kumar

    • B-Tech (Chemical Engg.)
    • Over 10 years of rich experience in the field of Process Optimization & Productivity, Energy Audit, Cement Plant Operation and Development of CRMs & PT

    Sh A Agnihotri

    • M.Sc (Chemistry)
    • Over 23 years of rich experience in the field of Development of CRMs, PT & TQM

    Last updated on :23/09/2019

    site
stats

    © 2018 NCB